Preparation
The surface should be thoroughly cleaned, dry and free from contamination such as grease, waxes or polish. Wash with mild detergent solution, rinse thoroughly with clean water and allow to dry. Smooth surfaces and bare wood should be lightly abraded with a fine waterproof abrasive paper to provide a key. If covering a previously painted surface, remove any flaking or blistering areas. Again rub down well with a fine waterproof abrasive paper. Wear a suitable face mask if dry sanding to avoid the inhalation of dust
Application
Stir well before use. Apply evenly using brush or roller in the direction of the wood grain. For an opulent distressed look; Apply one coat of Revive Metallic effect paint, allow to dry. Then apply one coat of Revive Chalky Furniture Paint and allow to dry. Lightly sand / scour to reveal layers. We recommend that you complete and protect your furniture with a choice of Johnstone’s Revive Finishing Waxes.
Cleaning
Remove as much product as possible from application equipment before cleaning. Wash immediately after use in warm soapy water and rinse thoroughly.
